The Procedures To Power-On - Delta A6000 User Manual

USER MANUAL
A6000
AC POWER SOURCE

2.6 The Procedures to Power-on

Connect the AC voltage, and turn on the power switch on the front panel. The AC
source will do a series of self-tests every time it is turned on. The LCD on the front panel
will light up and display as below under normal condition:
!
!
WARNING
16 │ www.deltaww.com
1. Error messages will show on the LCD panel if error occurs during turn on
process. Please check section 3.7 for error code.
2. Digital circuit inside AC source may not operate properly if turn on AC source
immediately after turn off. Recommend to wait 10 seconds to turn on AC
source after it was turned off.
*** CAUTION ***