Main Manual Setting; Set Voltage And Frequency - Delta A6000 User Manual

USER MANUAL
A6000
AC POWER SOURCE

3.3 Main Manual Setting

After the AC source is on and initialization is finished, screen will show the main
manual. Default output voltage and frequency is 110V and 60Hz. Voltage and frequency
setting shown on upper place on the screen, lower place of the screen shows the
measurement value, example shown as below.
Display at upper left
 SET MODE: Setting mode, no voltage output from AC source.
 OUT MODE: Output mode. When user press

3.4 Set Voltage and Frequency

There are three ways to set voltage and frequency at the main manual:
 Use numerical key to set parameter directly, then press
 Use knob to do adjustment. Turn knob clockwise to increase parameter, turn knob
anticlockwise to decrease parameter. Press
 Use
parameter, press
20 │ www.deltaww.com
voltage.
to select position of digital, then use knob or numerical key to adjust
to confirm.
at SET MODE, AC source outputs
to confirm.
to confirm.