Operation Through Keypad And Knob - Delta A6000 User Manual

USER MANUAL
A6000
AC POWER SOURCE

3.2 Operation through Keypad and Knob

DME-A602ABS series provides a user-friendly programming interface by using
the keypad on the front panel. Press
frequency to make selection. Use numerical and decimal point key or knob to set number,
press
can enter advanced parameter setting manual to make more detail setting from this page,
or press
At the list selection manual as above, user can press numerical key to do the
selection, then press
advanced setting manual, press
modify, use numerical key or knob to do the modification, then press
If there are "Press
manual, or press
18 │ www.deltaww.com
to confirm selection. User can press
again back to main manual.
to enter advanced parameter setting manual. After entering
to switch page" shown at the bottom of the manual, use
to switch pages. When setting is finished, press
back to main manual.
move cursor between voltage and
to enter screen as below: user
to move cursor to item which wants to
to confirm.
back to list selection