Set Series / Parallel Output Mode - Delta A6000 User Manual

USER MANUAL
A6000
AC POWER SOURCE

3.16.1 Set Series / Parallel Output Mode

DME-A602ABS SERIES provide two output modes:
 Series: Two phase output voltages operate in series. Same voltage and frequency
applies to both two phases output voltage.
 Parallel: two phase output voltage operate in parallel.
Rotate knob to set this parameter, then press
to do the change. The process to change parallel to series demonstrates as below:
1. Press
2. Rotate knob to change setting to Series, then press
41 │ www.deltaww.com
to move cursor to Phase Sel.
to confirm, about 800msec is needed
to confirm the change.