Gnss Constellation Selection Compatible Receivers - Raymarine LIGHTHOUSE 4 Operation Instructions Manual

GNSS constellation selection compatible receivers

GNSS constellation selection and SBAS selection is only available on
supported Raymarine GNSS receivers.
Compatible receivers
The following GNSS receivers support GNSS constellation selection and
SBAS selection:
• Axiom®+ display's internal GNSS receiver running LightHouse™ version 4.0
or later or LightHouse™ version 3.14 or later.
• Axiom® Pro display's internal GNSS receiver running LightHouse™ version
4.0 or later or LightHouse™ version 3.14 or later.
• Axiom® XL display's internal GNSS receiver running LightHouse™ version
4.0 or later or LightHouse™ version 3.14 or later.
• Axiom® 2 Pro display's internal GNSS receiver running LightHouse™
version 4.3 or later.
• Axiom® 2 XL display's internal GNSS receiver running LightHouse™ version
4.4 or later.
• RS150 external GNSS receiver running software version 1.28 or above.
Incompatible receivers
The following GNSS receivers do NOT support GNSS constellation selection
and SBAS selection:
• Axiom™ display's internal GNSS receiver.
• Axiom®+ display's internal GNSS receiver running LightHouse™ version
3.13 or below.
• Axiom® Pro display's internal GNSS receiver running LightHouse™ version
3.13 or below.
• Axiom® XL display's internal GNSS receiver running LightHouse™ version
3.13 or below.
• RS150 external GNSS receiver running software below version 1.28.
• AR200 Augmented reality sensor.
86
GNSS settings for incompatible GNSS receivers
Available settings when using a GNSS receiver that does NOT support GNSS
constellation selection and SBAS selection.
Note:
GNSS constellation selection is not supported and the options will be
disabled when using an incompatible GNSS receiver.
Differential positioning:
• Enable and disable the use of [Differential positioning] (SBAS) using the
toggle switch. Enabling differential positioning provides more accurate
positioning in regions covered by Satellite Based Augmentations Systems
(SBAS).
Note:
Differential positioning can be enabled and disabled, but individual SBAS
selection is not supported. The option will be disabled when using an
incompatible GNSS receiver.