Ais Settings Menu - Raymarine LIGHTHOUSE 4 Operation Instructions Manual

Enhanced AIS icons
Sailing Vessel
High speed
vessel / Wing
In Ground vessel
Passenger
vessel
Enhanced AIS icons are scaled or outlined according to the reported size of
the vessel, as shown below:
Relative length
(Gray outline)
The status of an AIS target is shown using different colors, outlines and
flashing as shown below:
290
AIS target status
Commercial
Cargo vessel
Other
Note:
When the MFD is configured as 'First responder' and is connected to STEDs
compatible AIS hardware, Blue Force AIS icons are used to identify other
STEDs equipped vessels. For details refer to:

AIS settings menu

You can configure AIS target settings from the [AIS Settings] menu: [Menu >
Targets > AIS Settings].
The following options are available:
• [Show AIS targets in chart] / [Show AIS targets in Radar] — Enables and
disables display of AIS targets in the Chart app / Radar app.
• [Enhanced AIS targets] — Enables and disables the display of enhanced
AIS target icons.
Lost (No border,
crossed through)
Buddy (Yellow
fill)
Dangerous
(Flashes Red)
p.316 — Blue Force Tracking
Uncertain
(Dashed outline)
Dangerous
and Uncertain
(Dashed outline
and Flashes Red)
ATON off
position (Red
border)