Table of Contents
Advertisement
Wave period
The wave period layer can be enabled and disabled from the [Weather
layers] menu: [Menu > Weather layers > Wave period].
17.13 Weather mode settings menus
The following settings menus are available in weather mode:
• [Cartography] — For details refer to:
• [Weather] — For details refer to:
• [Subscription] — For details refer to:
• [Advanced] — For details refer to:
• [Page settings] — For details refer to:
244
p.201 — Cartography settings menu
p.244 — Weather settings menu
p.244 — Weather subscription
p.207 — Advanced settings menu
p.209 — Page settings menu
17.14 Weather settings menu
The weather setting menu contains settings related to SiriusXM weather
receiver data.
Menu item and description
[Wind symbol]
Determines whether Arrows or Barbs are used for Wind
direction graphics in Weather mode.
[Marine zone boundaries]
Determines whether marine boundaries are shown in
Weather mode.
[Watchbox alerts]
Enables and disables Watchbox alerts.
[Watchbox range]
Determines the range from your vessel that Watchbox
alerts are displayed
17.15 Weather subscription
You can check your Sirius subscription status and data receipt from the
[Subscription ] settings menu: [Menu > Settings > Subscription].
The subscription settings menu will list the data types that have been
received and provide the date and time it was received and last updated.
You can also check your subscription status, your receiver's ESN and you
receivers signal strength.
Description
• Arrows
• Barbs
• On
• Off
• On
• Off
• 10nm
• 50nm
• 150nm
• 300nm
• 500nm
Advertisement
Table of Contents
Troubleshooting
