Gnss (Gps) Check - Raymarine AR200 Installation Instructions Manual

5.3 GNSS (GPS) check

If you intend to use the AR200 as your systems main GNSS (GPS) receiver then you may need to
manually select it from the Data sources menu.
The Data sources menu can be accessed from your Data master MFD: Homescreen > Settings >
Network > Data sources > GPS.
To choose the AR200 as your preferred source for GNSS (GPS) position data, select Raymarine
AR200 GNSS from the list of devices and then select Always use this device from the Pop-over
menu. Now the AR200 will always be the preferred source for GNSS (GPS) position data.
Once selected, a tick is placed in the Preferred column and the Manual selection toggle switch
will be enabled. If your AR200 has a position fix then position accuracy is displayed in the Value
in use column.
When a valid position fix is achieved then your vessel's latitude and longitude is displayed on the
Homescreen.
46