Shared Brightness - Raymarine LIGHTHOUSE 4 Operation Instructions Manual

Note:
In an autopilot system which does not contain a dedicated pilot control
head the datamaster also acts as the autopilot controller.
Switching datamaster
You can switch the MFD you want to be the datamaster at any time.
From the [Network] tab ([Homescreen > Settings > Network]):
1. Select the desired MFD from the list.
2. Select [Assign as datamaster] from the pop-over options.

Shared Brightness

Shared brightness enables simultaneous brightness adjustment of all
products that are part of the same group.
The following products are compatible with shared brightness:
• LightHouse™ 4 MFDs.
• LightHouse™ 3 MFDs using software version 3.4 or greater.
• LightHouse™ or LightHouse™ 2 powered MFDs.
• SeaTalkng ® Instrument displays and Pilot controllers.
• SeaTalkng ® VHF DSC Radios.
Homescreen
• RMK-9 and RMK-10 remote keypads.
Any adjustments to the shared brightness level will be applied to all products
assigned to the same group.
LightHouse™ 4 / LightHouse™ 3
V3.4 or greater
VHF DSC Radio
Multiple brightness groups can be configured. For example, these groups
could be used to reflect the physical location of products on your vessel
e.g.: helm and flybridge.
Shared brightness requires:
• All products to be compatible with the shared brightness function (see
list of compatible products above).
LightHouse™ / LightHouse™ 2 MFD
Instrument display / Pilot controller
105