Table of Contents
Advertisement
10.1 Augmented Reality (AR) initial test
With the AR200 and a compatible IP camera successfully installed, you can perform an initial check
of your Augmented Reality system.
Note:
Your LightHouse™ 3 powered MFD must be running version LH3.7 or above.
1. Select the Video app icon from the Homescreen.
2. From the main menu select your augmented reality compatible IP camera.
When you select the relevant camera, in addition to the video feed being displayed ClearCruise™
AR features are also displayed onscreen.
1.
Compass bar and heading indicator.
2. AR Object (AIS, Waypoint and Chart object) flag toggle options.
3. AR Object detection range.
10.2 GNSS (GPS) check
If you intend to use the AR200 as your system's main GNSS (GPS) receiver, you may need to
manually select it from the Data sources menu.
The Data sources menu can be accessed from your Data master MFD: Homescreen > Settings >
Network > Data sources > GPS.
Advertisement
Table of Contents
Troubleshooting
