Adding A Data Overlay; Display Data; Battery Data - Raymarine LIGHTHOUSE 4 Operation Instructions Manual

Multifunction display operating system
Hide thumbs Also See for LIGHTHOUSE 4:
Table of Contents

Advertisement

From the pop-over menu the following options are available:
• Change the data item in a data overlay by selecting [Edit] and choosing a
new data item from the list.
• Change the location of a data overlay by selecting [Move] and then moving
it to a new location.
• Change the size of a data overlay by selecting [Resize] and choosing either
[Small], [Medium], [Large] or [Extra large].
• Remove a data overlay by selecting [Delete]

Adding a data overlay

New data overlays can be added following the steps below.
1. Select [Edit data overlays] from the [Page settings] menu: [Menu >
Settings > Page settings.].
General information
2. Select [Add] or select and hold on a location and select [Add new].
3. Select a data category from the list.
4. Select a data item from the list.
5. If required select and hold on the new data overlay and drag it to a new
location.
6. Select [Done] to confirm the new data overlay(s).

4.8 Display data

Data transmitted by compatible devices that are connected to the same
network as the display and data generated by the display can be shown as
data items in the Dashboard app, the sidebar and as a data overlay.
Data items are organized into categories.
Note:
• Standard NMEA 2000 PGNs are listed next to the relevant data items.
• Supported Raymarine and 3rd party proprietary messages are not listed.
• NMEA 0183 sentences are not shown.
To view a list of all supported NMEA 2000 PGNs refer to:
p.476 — NMEA 2000 PGN support
To view a list of all supported NMEA 0183 sentences refer to:
p.475 — NMEA 0183 sentence support
To change or add a data item in the Dashboard app or sidebar select and
hold on the data cell and select [Edit] from the pop-over options to display
the list of data categories.
To change or add data item to a data overlay use the [Page settings] menu
from the relevant MFD app. For details refer to:

Battery data

Batteries are detected automatically by the display.
The following data items are available in the [Battery] category:
• Battery voltage (PGN 127508)
• Battery current (PGN 127508)
p.42 — Data overlays
43

Advertisement

Table of Contents
loading

Table of Contents