Inserting A Microsd Card - Axiom® Pro Displays; Inserting Memory Card Into External Storage Devices - Raymarine LIGHTHOUSE 4 Operation Instructions Manual

Inserting a MicroSD card — Axiom® Pro displays
1. Open the card reader door.
2. Pull down the card slot cover.
3. Insert the card(s) into a card slot and push until they clicks into place.
Important:
The upper card slot requires the memory cards contacts to be pointing
downwards. The lower card slot requires the memory card contacts to
be pointing upwards.
4. Close the card slot cover, ensuring it is seated correctly.
5. Close the card reader door.
Removing a MicroSD card
1. Open the card reader door.
2. Pull down the card slot cover.
3. Hold the [Power] button to access the [Shortcuts] menu, and then select
the [Eject SD Card] option.
4. Push the card in until it clicks.
5. Pull the card free from the card slot.
6. Close the card slot cover, ensuring it is seated correctly.
7. Close the card reader door.
36

Inserting memory card into external storage devices

1. Open the card reader door.
2. Insert the storage device into a card slots as follows:
• RCR-SDUSB slot 1 — With the contacts facing down, insert an SD card
(or an SD card adaptor containing a MicroSD card) into the upper slot
and push until it clicks into place.
• RCR-SDUSB slot 2 — With the contacts facing down, insert a USB drive
directly into the lower slot.
• RCR-2 slot 1 — With the contacts facing down, insert a MicroSD card
into the upper slot and push until it clicks into place.
• RCR-2 slot 2 — With the contacts facing up, insert a MicroSD card into
the lower slot and push until it clicks into place.
Important:
RCR-2 external card readers are not compatible with Axiom® 2 displays.
Removing external storage (SD and MicroSD)
With the card reader door open:
1. Use the display's Power button to access the [Shortcuts] menu, and then
select the [Eject SD Card] option.
2. Push the card in until it clicks.