SMC Networks SMC7724M Management Manual page 90

C
ONFIGURING THE
Command Line Interface
This example shows trunk 1 being configured as a downlink interface.
However, since ports 9 and 17 are members of trunk 1, ports 9-24 would
all become downlink ports.
Console(config)#pvlan
Console(config)#pvlan up-link ethernet 1/25 down-link port-channel 1
Console(config)#end
Console#show pvlan
Private VLAN status: Enabled
Up-link port:
Ethernet 1/1
Down-link port:
Trunk 1
Console#
In this example ports 9 and 17 are shown being configured as downlink
ports. Ports 10-16 and 18-24 will also become downlink ports as ports 9
and 17 are members of trunk 1.
Console(config)#pvlan up-link ethernet 1/25 down-link
ethernet 1/9,17
Console(config)#
2-62
S
WITCH
3-105
3-107
3-107