Command Usage
Using this command without specifying a VDSL port displays the
Ethernet link statistics of all ports on the switch and on the
connected CPE devices. The output shows the statistics collected by
the VDSL chipset on the switch, and the statistics collected by the
VDSL chipset on the CPE.
Example
The following example resets the switch and CPE side VDSL chipset of
VDSL port 1
Console#show controllers ethernet-controller ethernet 1/2
Ethernet 1/2 :
efm PHY on Switch:
Transmit
0 Bytes Transmitted
0 Frames Transmitted
0 Pause frames
0 Single Collision Frames
0 Multiple collisions
0 Late collisions
0 Excessive collisions
0 Deferred frames
0 Carrier sense errors
Receive
0 Bytes Received
0 Frames Received
0 Broadcast frames
0 Pause frames
0 Alignment errors
0 Collisions and Runts
0 Oversize frames
0 FCS errors
efm MAC on CPE:
Related Commands
clear controllers
ethernet-controller
VDSL C
OMMANDS
3-155