C
ONFIGURING THE
Web Interface
Click VLAN/VLAN Static Table. Select a VLAN ID from the scroll-down
list. Modify the VLAN name and status if required. Select the membership
type by marking the appropriate radio button in the list of ports or trunks.
Click "Apply."
Command Line Interface
This example adds the required interfaces, and then displays the VLAN
members.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport allowed vlan add 2 tagged
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#switchport allowed vlan add 2 untagged
Console(config-if)#exit
Console(config)#interface ethernet 1/13
Console(config-if)#switchport allowed vlan add 2 tagged
2-54
S
WITCH
3-69
3-102
3-69
3-69