switch will broadcast a request for IP configuration settings on the next
power reset. Otherwise, click "Restart DHCP" to immediately request a
new address.
Note: If you lose your web management connection, use a console
connection and enter "show ip interface" to determine the new
switch address.
Command Line Interface
Specify the management interface, and set the IP Address Mode to DHCP
or BOOTP.
Console#config
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#end
Console#ip dhcp restart
Console#show ip interface
IP address and netmask: 10.1.0.1 255.255.255.0 on VLAN 1,
and address mode: User specified.
Console#
B
C
ASIC
ONFIGURATION
3-69
3-52
3-53
3-55
2-13