SMC Networks SMC7724M Management Manual page 108

C
ONFIGURING THE
Command Line Interface
This example creates trunk 1 with ports 25 and 26. Just connect these
ports to two static trunk ports on another switch to form a trunk.
Console(config)#interface port-channel 1
Console(config-if)#exit
Console(config)#interface ethernet 1/25
Console(config-if)#channel-group 1
Console(config-if)#exit
Console(config)#interface ethernet 1/26
Console(config-if)#channel-group 1
Console(config-if)#end
Console#show interfaces status port-channel 1
Information of Trunk 1
Basic information:
Mac address: 22-22-22-22-22-2c
Configuration:
Name:
Port admin status: Up
Speed-duplex: Auto
Capabilities: 1000full,
Flow control status: Disabled
Current status:
Created by: User
Link status: Up
Port operation status: Up
Operation speed-duplex: 1000full
Flow control type: None
Member Ports: Eth1/25, Eth1/26,
Console#
2-80
S
WITCH
3-69
3-69
3-142
3-76