SMC Networks SMC7724M Management Manual page 156

C L
OMMAND INE
Syntax
copy file {file | running-config | startup-config | tftp}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config}
• file - Keyword that allows you to copy to/from a file.
• running-config - Keyword that allows you to copy to/from the
current running configuration.
• startup-config - The configuration used for system initialization.
• tftp - Keyword that allows you to copy to/from a TFTP server.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• The system prompts for data required to complete the copy
command.
• The destination file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the length
of file name should be 1 to 31.
(Valid characters: A-Z, a-z, 0-9, ".", "-", "_").
• The maximum number of user-defined configuration files depends on
available Flash memory.
• You can use "Factory_Default_Config.cfg" as the source file to copy
from, but you cannot use "Factory_Default_Config.cfg" as the
destination.
• To replace the startup configuration, you must use startup-config as
the destination.
• The Boot ROM image cannot be uploaded or downloaded from the
TFTP server. You must follow the console messages displayed during
boot up to download the Boot ROM (or Diagnostic) image.
3-20
I
NTERFACE