Decommissioning / Disposal - Dimplex LA 60P-TUR Installation And Operating Instruction

English
CAUTION!
The long-term leakage tightness of the entire hydraulic circuit
must be ensured (for example through repeated inspection).
The device is a permanently technically sealed system. In rare
cases, however, leakages may occur on the plate heat ex-
changer due to freezing. The risk is increased in particular in the
event of tampering on the dirt traps, if the requirements for fill-
ing the hydraulic circuit are not complied with, or if the mini-
mum flows are not observed.
CAUTION!
Due to the solubility of propane in water, propane may enter
the hydraulic circuit in the event of leakage at the plate heat
exchanger despite the safety valve and the bubble separator.
CAUTION!
Commissioning, maintenance and repair only by personnel
who have verifiably been trained in dealing with the
refrigerant propane.
EN-18

11 Decommissioning / disposal

Before removing the heat pump, disconnect the machine exter-
nally from the power source and shut it off hydraulically. The
heat pump must be dismantled by trained personnel. Observe
all environmental requirements regarding the recovery, recy-
cling and disposal of materials and components in accordance
with all applicable standards. Particular attention should be
paid to the proper disposal of the flammable refrigerant and re-
frigerant oil. Anyone carrying out work on the refrigeration cir-
cuit must be certified to safely handle flammable refrigerants or
be supervised by a person with such certification.
CAUTION!
Work on the heat pump must only be performed by
authorised and qualified after-sales service technicians!
CAUTION!
It is prohibited to remain in the direct vicinity of the device
during storms (risk of lightning)!
CAUTION!
Work outdoors on electrical equipment or live components
may only be carried out in dry weather conditions. In wet
conditions (rain, snow etc.), the device must be closed
correctly.
CAUTION!
Before removing the heat pump, disconnect the machine
externally from the power source.
CAUTION!
After disconnecting the power supply, you have to wait 5
minutes before all components are de-energised.
452167.66.42 · FD 0008
LA 60P-TUR
www.glendimplex.de