Related Manuals for Dimplex A Class Air Source Heat Pump
Summary of Contents for Dimplex A Class Air Source Heat Pump
- Page 1 A Class Air Source Heat Pump User Guide – T MPORTANT HIS MANUAL MUST BE LEFT WITH THE USER AFTER INSTALLATION 8/60476/0 Issue 1.03...
-
Page 2: Table Of Contents
Contents Introduction How the Heat Pump Works 2.1 Tips and advice to follow when using your new heat pump Heating System Controller Operating the User Interface 4.1 Temperature 4.2 Home Screen 4.3 Space Heating 4.3.1 Comfort Levels 4.3.2 Operating Modes 4.3.4 Setting Time Periods 4.4 Domestic Hot Water (DHW) 4.5 Information... -
Page 3: Introduction
Introduction time. If, for example, you require both hot Thank you for choosing a Dimplex Heat Pump. water and heating in the morning, it is Dimplex A-Class is designed specifically to recommended to use the DHW function maximise year-round heating system efficiency, first, followed by the space heating. -
Page 4: Heating System Controller
(User Interface) Display Screensaver The controller/user interface that is supplied with the Dimplex A-Class heat pump is used as (Esc) a heat pump controller as well as a heating and domestic hot water (DHW) controller. It is also the preferred option for use as a temperature control device. -
Page 5: Home Screen
4.2 Home screen Domestic hot water menu: The home screen, as shown in figure 5, is Set the heating mode of the hot water cylinder, accessed pressing confirm from set time periods for the timer, boost the hot temperature screensaver. water and set disinfection parameters. -
Page 6: Comfort Levels
UI, which changes the water is the next change. input temperature for your heating system. Glen Dimplex heat pumps allow for weather Zone temperatures: compensation, and operate on a heating curve, This icon shows the zone 1 temperature. The... -
Page 7: Operating Modes
4.3.2 Operating modes Clicking on the clock icon allows you to select from one of three running modes: mode activates pre-set timer TIMER programmes. ON mode turns the heating constantly on. OFF mode turns the heating constantly off. When the heating is set to OFF, you will be asked for a setback temperature, as shown in figure 9(b). -
Page 8: Domestic Hot Water (Dhw)
Pre-set time periods Water temperature: A number of time period have been pre-set to This icon shows the set point temperature of the typical heating time periods, to aid in quick and DHW. You can also adjust the set point hot water easy initial set up. -
Page 9: Information
Boost: When using TIMER mode, you may want to use DHW before the next scheduled period, for example, if you arrive home from work early and want to take a shower, but the DHW isn’t scheduled to run until later. In this case, the Boost function can be used to override the TIMER until the water in the cylinder reaches the set point temperature. -
Page 10: Adjusting Time And Date
The icons will be highlighted in green if that described in section 4.5.1. If a message is part of the system is on and white if it is off. active, it will be highlighted orange. Selecting Some of the symbols displayed on this screen the message (by middle clicking the rotary dial) will depend on the set up of your heating will open a list of details about the system... -
Page 11: Temporary Modes
4.6.2 Home Early 4.6 Temporary modes This mode turns ON your space heating until A number of temporary modes can be set which the next scheduled OFF time, when in TIMER override the running mode settings, as shown in mode. figure 17. -
Page 12: Safety
Products not installed with the Dimplex • hydraulics packs will not be supported by Dimplex. This includes but is not limited to thermal stores. This appliance can be used by children • aged from 8 years and persons with...