Input And Track Channel Ch View Elements; Track/V-Track Info; Dynamics And Eq Controls - Roland VS-2000 Owner's Manual Addendum

Input and Track Channel CH VIEW Elements

Track/V-Track Info

At the top edge of an input and track channel CH VIEW screen is information about the
corresponding hard disk recorder track and its V-Tracks. If you're working with:
•
•
If the channel is linked, you'll see track info for both of the corresponding tracks.

Dynamics and EQ Controls

Each input and track channel CH VIEW screen contains a dynamics processor and EQ
that can be set up by dragging your mouse in a graphic display, or manually.
Dynamics
Roland VS-2000 Owner's Manual, Version Two Addendum
Track and V-Track info for a standard input or track channel
Track and V-Track info for linked input or track channel
an input channel—the screen shows information regarding the same-numbered
hard disk recorder track.
a track channel—the screen shows information about its corresponding track.
Interactive graphic displays
1.
3.
Type-specific parameters
6—VGA Main Display CH VIEW Screens
Parameters
2.
4.
5.
The symbols in
the V-Track area
are described on
Page 47.
For an introduction to
dynamics processing,
see Owner's Manual
Page 156.
For an introduction to
EQ, see Owner's
Manual Page 160.
www.RolandUS.com
Compressor
parameters
Expander
parameters
63