Roland VS-2000 Owner's Manual Addendum page 49

Digital studio workstation
Hide thumbs Also See for VS-2000:
Table of Contents

Advertisement

17. DIR (DIRECT) 1-8 Selector
To assign the track channel to a Direct path, click the desired Direct
path's number so it lights.
18. MIX Button
Turn MIX on to send the track channel's signal into the MASTER
bus, the main stereo mix. Turn it off to remove it from the mix.
19. AUX and FX Send Controls
AUX Send
FX Send
The AUX and FX send controls include the following parameters:
When you change an Aux and FX bus's pre/post setting, you're setting the pre/post
configuration of the Aux bus for any channel that's using it, as described on Owner's
Manual Page 150.
The color of each Aux bus's and FX bus's slider provides helpful information at a
glance. When a slider's:
When odd/even Aux busses are linked, the even-numbered
bus's slider is replaced by a panning handle, as described on Page 73.
20. Status Toggles
Beneath the track control areas are five status
toggle buttons. You can click each button to
toggle the setting of the entire column of
buttons directly above it.
Click this status toggle:
MUTE
SOLO
AUTOMIX STATUS
TRACK STATUS
Roland VS-2000 Owner's Manual, Version Two Addendum
Send level—drag a slider to set the track channel's Aux and FX send level to the
corresponding Aux and FX bus (See Owner's Manual Page 150). The send level appears
to the right of the slider in dB. When Aux and FX busses are linked, the even-
numbered bus's send control is replaced by a panning handle, described on Page 73.
Send status—turns the Aux and FX send to each bus on or off. See Owner's Manual
Page 150.
Pre/post switch—sets the pre or post configuration of each Aux and FX bus. See
Owner's Manual Page 89.
blue—the send is turned on and the bus is set to Post.
red—the send is turned on and the bus is set to Pre.
gray—the send is turned off.
To:
un-mute all currently muted tracks.
un-solo all currently soloed tracks.
set the status of all Automix tracks to the same value.
set the TRACK STATUS of all tracks to the same value.
5—VGA Main Display Home Screen
Send level
Pre/post switch
Send status
MUTE status toggle
SOLO status toggle
AUTOMIX STATUS toggle
www.RolandUS.com
154
152
TRACK STATUS
toggle
49

Advertisement

Table of Contents
loading

Table of Contents