Roland VS-2000 Owner's Manual Addendum page 48

5—VGA Main Display Home Screen
8. FADER (LEV) Slider
Drag the FADER slider to set the track channel's CH EDIT FADER
parameter. The readout to the right of the slider shows the track
channel's output level in dB.
9. PAN Slider
Adjust the track channel's stereo position by dragging the PAN
slider as desired—the current pan position is shown to the right of
the slider. When you move the slider, you're adjusting the track
channel's CH EDIT PAN parameter value.
10. PHASE Button
Click "NRM" or INV" in the PHASE button to reverse the phase
polarity of the track channel's signal.
11. ATT Slider
Set the ATT slider to adjust the level of the signal coming from the
hard disk recorder into the track channel. The signal's level is shown
to the right of the slider.
12. GROUP (GRP) Selector
To assign the track channel to a fader group, click to the right of
"GRP" and select the desired fader group from the pop-up menu.
13. LINK Switch
LINK combines the CH EDIT ChLink and F.LINK parameters. Click
to the right of "LINK" and select the desired type of linking from the
pop-up menu or turn off linking.
14. FX Ins Selector
The numbers located right side of "FXINS" shows the status of effect
insertion. The number of effect currently inserted is highlighted. To turn
On/Off of the effect insertion or change insertion mode, Click number of
effect. You can select insertion mode or turn off on pop-up menu.
15. DYNAMICS (DYN) Switch and Overview
Turn on the track channel's dynamics processor by clicking the DYN
switch. The current dynamics shape is shown graphically next to the
switch—when the switch is on, the shape becomes blue.
You set up a channel's dynamics processing by drawing the desired shape with your
mouse in the CH VIEW screen as described on Page 63.
16. EQ Switch and Overview
Turn on the track channel's EQ by clicking the EQ switch. The
current EQ curve appears to the right of the switch—when the
switch is on, the curve turns blue.
You can set up a channel's EQ by drawing the desired curve with your mouse in the CH
VIEW screen, as described on Page 63.
48 www.Roland.com Roland VS-2000 Owner's Manual, Version Two Addendum
152
155
153
151
153
150, 154
215
151
152