Roland VS-2000 Owner's Manual Addendum page 37

11. LOOP
Click LOOP to display the AUTO PUNCH/LOOP window in which you
can set loop start and end points. If the loop points have been set, click
this button to turn on looped playback of the VS-2000's hard disk
recorder.
Loop start and end points appear above the Home screen's playlist as blue arrows.
When looping is turned on, a blue loop box connects the two points. See Page 50.
12. ABS/REL Indicator
The Current Time Location display can show absolute project time
(ABS), or can shift the time to correspond to an external device to which
the VS-2000 is being synchronized (REL).
13. SCRUB
Click SCRUB to repeatedly audition a tiny fragment of audio at the
timeline's current location in order to pinpoint a recorded event.
14. PREVIEW Buttons
When you're trying to locate the precise time at which an audio event
occurs, click the appropriate PREVIEW button to listen to audio just
before and/or after the current position of the timeline.
15. Position Bar
Click and drag the position bar's handle to move to any location in a
project. The position of the handle shows you where you are in a project.
16. Transport Buttons
Click:
•
•
•
•
•
•
Roland VS-2000 Owner's Manual, Version Two Addendum
PREVIEW
TO
Rewind
ZERO
ZERO—to return the timeline to the start of the project.
Rewind—to move the timeline quickly back through the project.
FF—to move the timeline quickly forward through the project.
STOP—to halt playback of the project.
PLAY—to begin playback from the timeline's current location.
REC—to begin recording.
4—VGA Main Display Universal Elements
PREVIEW THRU
PREVIEW
FROM
Handle
STOP
REC
FF PLAY
Rewind and FF can
move the timeline in
increments as small as
one second.
www.RolandUS.com
178
300
181
180
126
175
37