The Master Edit Screen; Ch Parameter Level Knob; New Shortcuts - Roland VS-2000 Owner's Manual Addendum

2—Version Two Enhancements

The MASTER EDIT screen

Function button F4 (FX RTN) has been added (the LCD display only). Press F4 (FX RTN)
the FX return Parameter View screen (Owner's Manual Page 231). When this screen
appear, the FADER parameter is displayed as default.

CH PARAMETER LEVEL knob

You can use the CH PARAMETER Level knob to adjust the Ratio of the DYN parameter
(Owner's Manual Page 167).
CH PARAMETER Knob:
LEVEL knob

New Shortcuts

A variety of new shortcuts have been added in Version Two.
Hold down:
CLEAR and press CH EDIT
CLEAR and
turn the TIME/VALUE dial
In addition, when the CH EDIT VIEW screen or the Parameter View screen is displayed:
Hold down:
CLEAR and
turn the TIME/VALUE dial
The mixer channel that is edited will be the mixer for the current channel. You will need
to select the parameters that will be affected.
16 www.Roland.com
Expander parameter:
Ratio
To:
switches the UTILITY menu's Rtn TO Tr STATUS
Sw on/off parameter (Owner's Manual Page 379).
When the CH EDIT VIEW screen or the Parameter
View screen is displayed, this edits the following
parameters for each mixer.
To:
edits the following parameters for each mixer.
• Track Mixer—V-TRACK, MIX Switch, SOLO
Switch, MUTE Switch
• Input Mixer—MIX Switch, SOLO Switch,
MUTE Switch
• Effect return Mixer—MIX Switch, SOLO
Switch, MUTE Switch
Roland VS-2000 Owner's Manual, Version Two Addendum
Compressor parameter:
Level