Roland VS-2000 Owner's Manual Addendum page 25

Some of these areas are always available and some change, as described later in the
Addendum:
•
•
•
•
The VGA's Main Display Home Screen
Like the LCD, the VGA main display has its own Home screen, shown on
the previous page. You can return to the Home screen at any time by
clicking the HOME button in the upper right-hand corner of the display (as
shown on Page 24), the HOME button on the VS-2000 or the Home button
on your keyboard.
Button Colors on the VGA Main Display
The VGA contains a wide assortment of on/off switches,
presented as clickable buttons. Unless otherwise noted,
when a button is switched on, it turns yellow—when it's off,
it's gray.
The transport REC button and the Mastering Room and
Automix Record buttons behave a little differently: they
turn red when activated.
Interaction with the VS-2000's Top-Panel Controls
The VS-2000's top-panel buttons generally interact with the currently selected main
display as described in the VS-2000 Owner's Manual. When the VGA is selected as the
main display, however, there are a few minor differences:
•
•
Sub-Windows
In some cases, when you click a button on the VGA main display or select a menu item,
a window opens that looks just like the corresponding screen on the VS-2000's LCD,
with the same F buttons available at the bottom of the window. The contents of the
window behave the same way they do on the VS-2000's LCD. You can exit the screen by
clicking the box in its upper-left corner or by pressing F6 (EXIT).
Roland VS-2000 Owner's Manual, Version Two Addendum
Menus, control bar, F buttons, status strip and remaining space status strip—are always
visible on the VGA. See Chapter 4.
PAN knob strip and clipping indicators—are always visible on the VGA. See Chapter 4.
The meters strip—shows the currently selected level meters. See Chapter 5.
Content pane—the contents of this area change as described in Chapters 5-8.
Hold down SHIFT and press F1 (PROJ), F2 (TRACK), F3 (EFFECT) or F4(UTIL)
button on the VS-2000 to display the corresponding menu on the VGA. To close a
menu, press EXIT/NO.
The Home screen's fader/pan buttons determine what's displayed in the lower part
of the screen. Press:
• IN F/P—to display the Input Mixer and Master Block.
• TR F/P—to display the Track Mixer and FX Return Mixer.
3—Version Two VGA Overview
Gray
Yellow
Gray
Red
www.RolandUS.com
Off
On
Off
On
25