Roland VS-2000 Owner's Manual Addendum page 75

7. PAN Knob
Set the stereo position of the channel in the main MASTER bus mix by
dragging the PAN knob up or down as desired.
8. TRACK STATUS Button
Repeatedly click the TRACK STATUS button to set status of the
corresponding hard disk recorder track. This is the same thing as
pressing the track's TRACK STATUS button on the VS-2000.
9. Channel Fader
The position of the channel fader sets the level of signal coming out of
the channel.
10. LINK Switch
LINK combines the CH EDIT ChLink and F.LINK parameters. Click
to the right of "LINK" and select the desired type of linking from the
pop-up menu, or turn off linking. The LINK switch occupies the
combined lower edge of both of the channels it controls.
Roland VS-2000 Owner's Manual, Version Two Addendum
7—Mixer Views
www.RolandUS.com
155
176
152
150, 154
75