Roland Audio Canvas UA-100 User Manual page 97

Modify the Disk Drive Settings as Follows
1.
In the Windows Control Panel, double-click System.
2.
Click the Device Manager tab.
3.
Double-click Disk drives to access the list of devices.
4.
From the list, select GENERIC IDE DISK TYPE01, and click Properties to access
the GENERIC IDE DISK TYPE01 Properties dialog box.
* In GENERIC IDE DISK TYPE01, the number 01 may differ depending on your computer
system.
fig.05-04e
5.
Click the Settings tab, check the DMA check box in Options, and click [OK].
* Depending on your system, a dialog box for DMA settings may appear. Verify the contents
of the dialog box, and click [OK] or [Cancel].
fig.05-05e
6.
In System Properties dialog box, click [OK] to close the dialog box. Restart your
computer to make these settings take effect.
Troubleshooting
97