Roland Audio Canvas UA-100 User Manual page 36

Applying Effects While Playing Audio Data
Select the Effect Source
Click the Effect Select button, and the window for the effect mode selected by Effect
Mode Selector will appear. In this example, click [SYS 1] to open the Full Effects
window.
fig.03-sys1e
Make Effect Settings
While producing sound from the input source, set the Effect Type, parameter
(Param), and Value. For this example, select High Quality Reverb, and adjust the
various parameters while the audio data plays back.
To adjust the amount of effect that is applied, use the Send 1 Controller and the
Return Controller.
fig.03-sr.eps_50
Try adjusting the various parameters so that the sound is to your liking. Can you hear
the effect being applied?
36
For details on effect
parameters, refer to
appendix "Effect
Parameters Chart" (p.
66). For details on making
effect settings, refer to the
UA-100 Controller Help
and to the Reference
Manual.
For details on the Send 1
Controller and Return
Controller, refer to
"Using Multiple Effects
Simultaneously" (p. 50)