Roland Audio Canvas UA-100 User Manual page 48

Re-recording Audio Data While Applying an Effect
Record
Rewind to the beginning of the song, and begin recording. When you finish recording,
stop.
Turn the Effect Off
Since an effect has already been applied to the recorded data, you will need to turn off
the currently specified effect before you playback. In the window that you opened in
"Select the Effect Source" (p. 47) (the Full Effects window in this case), click the
effect switch to make it go dark.
fig.efx-swe.eps_60
Playback
Rewind to the beginning of the song. Mute the original audio track, and play it back
the newly recorded audio data. The recorded data will be played back with the effect
(in this case, High Quality Reverb).
48