Applying Effects While You Record - Roland Audio Canvas UA-100 User Manual

Applying Effects While You Record

You can apply the internal effects of the UA-100 while you record onto your computer.
When the UA-100 is connected to your computer, you can use the UA-100 Controller
to control the internal effects.
Here we will explain how to select a guitar as the input source, and apply an effect (the
"Distortion" effect of Compact Effects Mode) while you record onto your sequencing
software. First start up your sequencing software, and connect your guitar to the UA-
100 as described in "Recording Guitar" (p. 24).
Select the Input Source
Start up the UA-100 Controller, open the Mixer window, and use the Mic/Guitar select
to switch the input mode so that the desired input source is selected. For this
button
example, select Mic/Guitar
fig.03-n-m
Select the Monitor Source
Use Master Source Selector (Source Select: white) to select the master source for
monitoring. For this example, select MAIN.
fig.03-m-me
. (When you click , the display will change.)
37