Roland Audio Canvas UA-100 User Manual page 51

Make Effect Settings
1
While playing sound on the input source, use the Compact Effects window to set the
Effect Type, parameter (Param), and Value. In this example, apply the insertion
effect to the guitar (the settings of the Compact Effects window will be used) as you
adjust the parameters.
Then use the System Effect1 and System Effect2 windows to set the Effect Type,
parameter (Param), and Value. In this example, make settings for the system effects to
be applied to the audio data (the settings of the System Effect1 and System Effect2
windows will be used).
2
To adjust the amount of system effects that are applied, use the Send 1 Controller,
Send 2 Controller, and Return Controller.
Use the mouse to click and drag the Wave 1 Send 1 Controller or Send 2 Controller
or the Return Controller, to rotate them clockwise. This will cause the effects specified
in the System Effects1 and System Effects2 windows to be applied to the existing
audio data.
fig.03-24e.eps_60
The Send 1 Controller and Send 2 Controller adjust the levels at which the sound of
each input source are sent to the system effects System Effect 1 and System Effect 2.
The Return Controller adjusts the level at which the sound from the system effect is
returned. As you set the Effect Type and effect parameters to your liking, use these
controllers to adjust the amount of each effect.
Using Multiple Effects Simultaneously
If Roland UA-100 Wave
2 is selected as the port for
the existing audio data,
adjust the Send 1
controller or Send 2
controller for Wave 2.
51