Roland Audio Canvas UA-100 User Manual page 17

Control Assign window
When you use the UA-100 Effect Type Selector to select VT/Vocal/Guitar/GAME,
[Control Assign] will appear in the Main window.
When you click this button, the Control Assign window will open. When the UA-100
is used by itself, four effects (VT, Vocal, Guitar, Game) can be used. The UA-100 has
four effect controllers that can control the parameters of these effects, and these
parameter assignments can be modified. Since the assignments you change are
remembered by the UA-100, they will still remain even when the UA-100 is
disconnected from the computer.
* This customization can be performed only by the UA-100 Controller. If you wish to make
changes, you will need to re-connect the UA-100 to your computer.
fig.02-10e.eps_60
Assigning effects to the Effect Controller
1.
Make sure that the UA-100 is connected to your computer.
2.
Open the Main window of the UA-100 Controller.
3.
Rotate the Effect Type Selector of the UA-100 to select the effect type. Control
assignments can be made for four effect types such as VT/Vocal/Guitar/Game.
4.
In the UA-100 Controller, click [Control Assign]. The Control Assign window
will appear.
5.
Assign a parameter to each effect controller. Assign a total of four parameters;
one for the center and one for the outer concentric knobs of both Effect Control
knobs. For each, choose a parameter from the drop-down list.
6.
When you have finished making assignments, click [Assign Write] to write the
settings into the UA-100.
7.
If you wish to restore the assignments to the preset selections, click [Preset].
About the UA-100 Controller
17