Roland Audio Canvas UA-100 User Manual page 54

Adding Harmony to a Vocal
Make Settings for the Voice Transformer Function
We will set the Vocal 1 part slightly higher than your own voice. Set the Vocal 1 pitch
controller select button to Manual, set the Pitch Controller to 700, and finally set the
level fader to 100.
Then, set the Vocal 2 part slightly lower than your own voice. Set the Vocal 2 pitch
controller select button to Manual, set the pitch controller to the -500, and finally
set the level fader to 100.
fig.03-29e.eps_60
Make Effect Settings
1
For the System effect, you can set parameter (Param) and Value to make detailed
settings for the effect. Here we will not make any particular settings, but will set the
direct level fader (DIRECT LEVEL) to 100 so that the sound unprocessed by the pitch
controller will be combined with the output.
fig.03-30e.eps_60
54