Roland Audio Canvas UA-100 User Manual page 27

5
On your sequencing software, check that the audio input level is not exceeding the
maximum level. If it exceeds the maximum level, adjust the Wave output slider in the
UA-100 Controller Mixer window so that the level is as high as possible without
exceeding the maximum input level.
fig.mix-levele
Record
Rewind to the beginning of the song, and begin recording. When you finish recording,
stop. Rewind to the beginning of the song, and play it back to hear the recorded data.
If you are using a sequencing software such as Cakewalk and have selected Left
1:Roland UA-100 Wave (or Right 1:Roland UA-100 Wave ) as the source in the track,
the played sound will be panned to the far left (or the far right). To place the sound in
the center, use your sequencing software to adjust the pan of the track to the center. In
the case of Cakewalk, click the pan field, and input "64."
Recording Guitar
For details on how to
check the audio input
level of your sequencing
software, refer to the
manual for your
sequencing software.
27