Re-Recording Audio Data While Applying An Effect - Roland Audio Canvas UA-100 User Manual

Re-recording Audio Data While Applying an Effect

You can playback a previously-recorded track of audio data while applying a UA-100
effect, and re-record the result. This makes it possible to apply an effect to audio data
that was recorded without effect processing (dry).
Here we will explain the procedure for applying an effect to an audio track of the
existing sequence data, and re-record it on a different track. Before you begin, open the
data in your sequencing software.
Select the Monitor Source
Start up the UA-100 Controller, open the Mixer window, and use Master Source
Selector (Source Select: white) to select the master source for monitoring. For this
example, select MAIN.
fig.03-m-me
Select the Recording Source
Use Wave Source Selector (Source Select: red) to select the wave source that will
be recorded. For this example, select Ch3.
fig.03-o-ch3e
If Roland UA-100 Wave
2 is selected as the port
for the existing audio
data, select Ch4.
45