4 Transporting The Unit; Transporting The Unit To The Installation Site; Unpacking The Unit - Henny Penny FSDE610 Installation Manual

Table of Contents

Advertisement

Transporting the unit
4 Transporting the unit
CAUTION
NOTICE

4.1 Transporting the unit to the installation site

4.2 Unpacking the unit

CAUTION
INFORMATION
16
Risk of property damage and personnel injury from tipping unit
• Stay clear of lifted unit.
• Move lifted unit carefully.
Risk of property damage from improper transport
• Transport the unit upright.
• Do not tilt or stack the unit.
• Pay attention to protruding parts when transporting the unpacked unit.
Prior to transporting the unit to the installation site, ensure that:
The roadway has adequate load-bearing capacity.
Wall openings are large enough.
Image: Lengthwise and crosswise transport on pallet
Use suitable transport means to move unit to its installation site.
Risk of injury from sharp edges
• Wear protective gloves.
When unpacking the unit, inspect it for transport damage.
Do not install damaged units or put into service.
Installation instructions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfusion electric spacesaver plus team

Table of Contents