4 Transporting The Unit; Transporting The Unit To The Installation Site; Unpacking The Unit - Henny Penny FlexFusion FSEN605 Installation Manual

Transporting the unit
4 Transporting the unit
CAUTION
NOTICE

4.1 Transporting the unit to the installation site

4.2 Unpacking the unit

CAUTION
INFORMATION
16
Risk of property damage and personnel injury from tipping unit
• Stay clear of lifted unit.
• Move lifted unit carefully.
Risk of property damage from improper transport
• Transport the unit upright.
• Do not tilt or stack the unit.
• Pay attention to protruding parts when transporting the unpacked unit.
Prior to transporting the unit to the installation site, ensure that:
• The roadway has adequate load-bearing capacity.
• Wall openings are large enough.
Use suitable transport means to move unit to its installation site.
Image: Lengthwise and crosswise transport on pallet
Risk of injury from sharp edges
• Wear protective gloves.
When unpacking the unit, inspect it for transport damage.
Do not install damaged units or put into service.
Installation instructions