Henny Penny FSDE610 Installation Manual page 21

• Follow the manufacturer's instructions for using the means of fastening.
Depending on the size, it is essential that certain combisteamer types
or combisteamers used in combination with a Stapelkit (stacking kit), a
recirculation hood, an underframe or base cabinet be secured to
prevent tipping.
Unit types that must be secured to prevent tipping (see "Unit and
connection data").
a
d
1
Image: Arrangement of floor plates (view from above)
a Unit leg with castors
b Unit leg
A special set of fasteners is either supplied by the manufacturer or
available as an accessory to secure the unit against tipping.
The set of fasteners includes two floor fasteners and all components
required for bolting or gluing to the floor.
The unit is fastened by means of two floor fasteners, as indicated in the
drawing.
Floor without steam barrier
In the case of floors without a steam barrier, the floor plates are bolted
to the floor using the bolts provided.
Installation instructions
2
c
c Cooking chamber door
d Floor plate
Installing the unit
b
2 1
21