Erasing Audio Tracks (Clear) - Roland Fantom X6 User Manual

3.
Press [PLAY] or [F8 (Start)].
The Mixdown Standby window will close,
and [REC] indicator will change from
blinking to lit, and the mixdown will
begin.
When the mixdown begins, the Mixdown
window will appear.
fig.02-xx_40
To close the Mixdown window, press [F8
(Close)] or [PLAY]. To open it again, press
[PLAY].
4.
The mixdown will end automatically.
The [REC] indicator will go out.
* You can also press [STOP] to stop before you
reach the end.
5.
The Mixdown Sample Assign window
will open.
fig.02-xx_40
Use [RESET][BWD][FWD] or [CURSOR] to
specify the location at which the sample
event will be assigned.
6.
Press [F8 (Assign)] to assign the sample
event to the audio track.
A sample event that plays the mixed-down
sample will be assigned to the audio track,
and you will return to the previous screen.
• If you press [F6 (Unload)], the samples you
just mixed down will be deleted
(unloaded). A message will ask you for
confirmation; press [F8 (Exec)] to confirm.
• If you want to neither assign nor unload
the sample, press [F7 (Cancel)].
* Even if you cancel, the mixed-down sample
data itself will remain in the sample list.

Erasing audio tracks (Clear)

1.
Hold down [SHIFT] and press [F2
(Clear)].
The Audio Track Clear Menu window
appears.
fig.02-xx_40
2.
Turn the VALUE dial, or press [INC]
[DEC] to select the menu.
• Clear All
All audio tracks will be erased.
(The track names and setup data will also
revert to their default settings.)
• Clear Track
The selected audio track will be erased.
(The track name and setup data will also
revert to its default settings.)
3.
Press [F8 (Select)].
A message will ask you for confirmation.
4.
Press [F8 (Exec)].
* If you decide to cancel, press [F7 (Cancel)].
* This operation will not change the length of the
song.
Using audio tracks
19