Table of Contents
Advertisement
Multisample editing functions
Saving a multisample
Once you've edited a multisample, the word
"EDITED" appears beside the multisample
name.
Be aware that if you turn off the power or select
another screen when the "EDITED" indication
is shown, the changes you made to the
multisample will be lost.
fig.04-32
1.
In the Multisample Edit screen, press
[WRITE].
The Multisample Name screen will appear.
fig.04-33_40
2.
Assign a name to the multisample.
* For details on how to assign a name, refer to
"Assigning a Name" (Owner's Manual; p. 36).
38
3.
When you've finished inputting a name,
press [F8 (Write)].
The Multisample Write window will
appear.
fig.04-34_40
4.
Turn the VALUE dial or use [INC][DEC]
or
to select the multisample
number of the write destination.
5.
Press [F8 (Write)].
A message will ask you to confirm the
Write operation.
6.
To write the data, press [F8 (Exec)].
If you decide to cancel, press [F7 (Cancel)].
The multisample will be written, and you
will return to the Multisample Edit screen.
Never turn off the power while data is
being written.
Advertisement
Table of Contents
