Update Procedure - Roland Fantom X6 User Manual

Updating the Fantom-X

Update procedure

1.
Insert the "FANTOM-X Audio Track Expansion Kit" CompactFlash card into the PC
card adapter.
fig.05-01
2.
Make sure that your Fantom-X is switched OFF.
3.
Insert the PC card adapter (see step 1) into the Fantom-X.
4.
Switch ON the power on your Fantom-X.
After the opening movie is displayed, a caution regarding the update procedure will
appear.
* If the screen shown below does not appear, switch off the Fantom-X's power, and repeat the operation
from step 1.
fig.05-02_40
5.
Read the warning, and if you wish to proceed, press [F7 (OK)].
* If you wish to abort the update procedure at this point, press [F1 (EXIT)], turn off the power, and
remove the PC card.
A screen will ask you for confirmation.
fig.05-03_40
10
PC Card Adapter CompactFlash