Table of Contents
Advertisement
Audio Track Mixer 2 Screen
Indication
Parameter
in the Mix-
er screen
S
Solo Switch
Plays only the specified audio track.
Value: ON, OFF
M
Mute Switch
Mutes (silences) the specified audio
track.
Value: ON, OFF
Output
Output Assign
Assign
Specifies how the direct sound from
each audio track will be output.
Value
MFX 1–3: The sound will be rout-
A, B:
MON:
Key
Audio Track Key Shift
Adjusts the pitch of each track in
semitone steps (+/-2 octaves).
Value: -24– +24
ed through the multi-
effect and output in ste-
reo. You can also apply
chorus or reverb to the
sound that has passed
through the multi-ef-
fect.
The sound will be out-
put in stereo from the
OUTPUT A (MIX) jacks
or OUTPUT B jacks
without passing
through a multi-effect.
The sound will be out-
put in stereo from the
OUTPUT A (MIX) jacks
without passing
through a multi-effect.
Use this setting if you
want only to hear the
sound without resam-
pling or recording it.
Using the knobs to control the
mixer
In the Audio Track Mixer screen, you can use
[F7(⇐)] [F8 (⇒)] to select the four audio tracks
that will be controlled by the REALTIME
CONTROL knobs. The currently selected audio
tracks are indicated by a light green frame
around them. Use
parameter that you want to control.
fig.02-20.e
Opening the Loop/Locate window
(Loop/Locate)
Owner's Manual; p. 179
Using the pads to mute audio
tracks (Mute)
p. 16
Using audio tracks
to select the
23
Advertisement
Table of Contents
