Saving Your Audio Tracks - Roland Fantom X6 User Manual

Using audio tracks
When recording starts, the Audio
Recording window will appear.
fig.02-28_40
To close the Audio Recording window,
press [F8 (Close)] or [PLAY]. To open it
once again, press [PLAY].
6.
When you've finished recording, press
[STOP].
The [REC] indicator will go dark.
7.
The Audio Rec Sample Assign window
will open.
fig.02-31_40
The location at which the recorded sample
event is to be assigned will blink.
Use [RESET][BWD][FWD] or [CURSOR] to
specify the location at which you want to
assign the sample event.
8.
Press [F8 (Assign)] to assign the sample
event to the audio track.
A sample event that plays the recorded
sample will be assigned to the audio track,
and you will return to the previous screen.
• If you press [F6 (Unload)], the samples you
just recorded will be deleted (unloaded). A
message will ask you for confirmation;
press [F8 (Exec)] to confirm.
• If you want to neither assign nor unload
the sample, press [F7 (Cancel)].
* Even if you cancel, the recorded sample data
itself will remain in the sample list.
26

Saving your audio tracks

When you save a song that contains audio
tracks, the audio track data is automatically
saved in a file with a filename extension of
".SVA" and the same name as the song,
together with the identically named ".SVQ"
data file.
Owner's Manual; p. 223
fig.02-02
(User, Card)
ROLAND
PNL
SEQ
SMPL
SND
TMP
AUDIO_IMPORT
BMP
PATCH_IMPORT
TEXT
System Setup (Owner's Manual; p. 198) includes
the following audio tracks' parameters.
• Level
• Pan
• Reverb Send
• Chorus Send
* Changes in the parameter value are not
recorded.
"Deleting a Song" (p. 49)
SNG (.SVQ, .SVA)
• Output Assign
• Mute/Solo
• Key Shift