Deleting The Selected Sample Event From An Audio Track (Delete); Copying A Sample Event (Copy); Unloading A Sample (Unload Sample); Combining The Contents Of The Tracks Into One Audio Track (Mixdown) - Roland Fantom X6 User Manual

Using audio tracks
Deleting the selected sample
event from an audio track (Delete)
1.
Use [CURSOR] to select the sample
event that you want to delete from an
audio track.
2.
Press [F7 (Delete)].
The selected sample event will be deleted
from the track.
* This merely deletes the sample event; the
sample data itself will remain in the sample list.

Copying a sample event (Copy)

Here's how to copy the currently selected
sample event.
1.
Use [CURSOR] to select the sample
event that you want to copy.
2.
Press [F8 (Copy)].
The currently selected sample event will be
copied to a location immediately following
itself.
If copying the sample event would make
the track exceed the current length of the
song, a screen will ask you whether you
really want to extend the length of the
song.
When you press [F8 (Exec)], the song will
automatically be lengthened as necessary
to accommodate the newly copied sample
event.
Unloading a sample
(Unload Sample)
This operation deletes the currently selected
sample event and also unloads it from the
sample list.
1.
Hold down [SHIFT] and press [F5
(Unload Sample)].
A message will ask you for confirmation.
2.
Press [F8 (Exec)] to execute.
* If you decide to cancel, press [F7 (Cancel)].
18
Combining the contents of the
tracks into one audio track
(Mixdown)
This operation lets you specify a region, then
have the performance of all audio tracks and
MIDI tracks in that region be combined into a
single track.
After creating a sample in this way, you can
save it on your computer as the audio data for a
single song.
1.
Hold down [SHIFT] and press [F1
(Mixdown)].
The [REC] indicator will blink, and the
Mixdown Standby window will appear.
2.
In the Mixdown Standby window,
specify the region that you want to mix
down.
Use [CURSOR] to move the cursor to each
parameter, and turn the VALUE dial or use
[INC][DEC] to set the value.
fig.02-xx_40
• Start Point
Specify the measure at which the mixdown
is to start.
• End Point
Specify the measure at which the mixdown
is to end.