Importing Patches And Rhythm Sets - Roland Fantom X6 User Manual

Importing patches and
rhythm sets
Here's how patches, rhythm sets, multisamples,
and samples placed in the following directory
using Fantom-X Sample Converter can be
imported into the Fantom-X.
fig.06-05.e
(User, Card)
ROLAND
PNL
SEQ
SMPL
SND
TMP
AUDIO_IMPORT
BMP
PATCH_IMPORT
(IMPORT.SVD etc.)
TEXT
* If you used Fantom-X Sample Converter only
to convert partials or samples, load them using
Import Audio. (Owner's Manual; p. 220)
* If this directory does not exist, use your
computer to create it.
1.
Press [MENU].
2.
Press or
then press [ENTER].
The Utility Menu screen will appear.
fig.06-02_40
3.
Press [F5 (Import Patch)].
The Import Patch/Rhythm screen will
appear.
* From this point onward, the screens are shown
in "wizard" format to guide you through the
process.
to select "Utility," and
Changes due to the upgraded editor software
4.
The screen will indicate STEP 1.
The Fantom-X will check whether there are
any files that can be imported. If such files
are found, the User and/or Card icons will
appear.
Turn the VALUE dial or use [INC][DEC]
or to choose whether you want
to import from User or from Card.
* If there is no data that can be imported, these
icons will not appear.
5.
Press [F8 (⇒)].
6.
STEPS 2–4 will appear.
Turn the VALUE dial or use [INC][DEC]
or to select the starting number of
the write destination for patch,
multisample, and rhythm set respectively.
(The user or card data will be overwritten
by the imported data.)
If you specify a high number as the starting
number, the imported patches, rhythm
sets, and/or multisamples may exceed
their maximum numbers, making them
impossible to import the remains.
You can't change the write-destination
group (User/Card). It will be the same as
the loaded group.
If there is no data to import, a screen like
the following will appear.
fig.06-03_40
Sample data will be assigned automatically
to numbers at the write destination.
7.
Press [F8 (⇒)].
43