Table of Contents
Advertisement
Specify the original key (Org Key)
of the sample
Samples you record or import are set so that
they will play at their original pitch when you
press the C4 note.
In order to correctly match the key of the
sample to the keyboard, you must modify the
"original key" of the sample.
For example, if you sampled a sound whose
pitch was E4, you'll need to change its "original
key" setting to E4 so that it will play at its
original pitch when you press the E4 note of the
keyboard.
Similarly, when you execute Create
Multisample, you will need to specify the
original key of the samples that make up that
multisample, so that they are correct for the
keys to which they are assigned.
* A sample will not play more than two octaves
higher than its original key.
1.
In the Multisample Edit screen, press
[F5 (Org Key)].
The Original Key window will open.
fig.04-28_40
The buttons have the following functions.
• Value, [INC][DEC]
Change the original key of the sample
assigned to the current note.
• [F7 (Preview)]
The sample will play at its current original
key while you continue holding down the
button.
• [F8 (Close)]
Closes the Original Key window.
• Keyboard
When you play the keyboard, the original
key of the sample assigned to the most
recently pressed note will be displayed.
Multisample editing functions
2.
Save the sample whose original key you
changed.
* For details on saving a sample, refer to "Saving
a Sample" (Owner's Manual; p. 159).
Sorting samples in the order of
their original key (Sort)
This operation reassigns all samples currently
assigned to the multisample, so that they are
placed in the order of their original key setting.
(This produces the same result as Create
Multisample.)
1.
In the Multisample Edit screen, hold
down [SHIFT] and press [F4 (Sort)].
A screen will ask you for confirmation.
2.
Press [F8 (Exec)].
If you decide to cancel, press [F7 (Cancel)].
Moving all samples to left or right
(Shift)
Here's how all samples assigned to notes can be
shifted to the left or right.
1.
In the Multisample Edit screen, hold
down [SHIFT] and press [F5 (⇐)][F6
(⇒)].
Moving the data of the current
zone to left or right (Move)
Here's how the sample of the current zone can
be moved to left or right.
1.
In the Multisample Edit screen, hold
down [SHIFT] and press [F7 (⇐)][F8
(⇒)].
37
Advertisement
Table of Contents
