Table of Contents
Advertisement
Using audio tracks
Editing audio tracks
(Audio Track Edit screen)
Moving a sample event (Move)
Here's how to move the currently selected
sample event to another track or location.
1.
Use [CURSOR] to select the sample
event you want to move.
The selected event is displayed in orange.
2.
Press [SHIFT].
The cursor will change shape as follows.
fig.02-14
3.
While continuing to hold down [SHIFT],
press
or
Move the sample event to the desired
track.
4.
While continuing to hold down [SHIFT],
use the following buttons to move the
sample event to the desired location.
• [INC][DEC]
Move the sample event in steps of one tick.
•
Move the sample event in steps of one
measure.
• VALUE dial
Move the sample event in steps of 16th
note (120 ticks).
16
.
Selecting and auditioning a
sample event (Preview)
1.
Use
to select a track.
2.
Press [ENTER].
The sample in the track you selected in
step 1 that is closest to the current location
will be selected.
While the play is stopped, you can audition
(preview) the sample by continuing to hold
down [ENTER].
Using the pads to mute audio
tracks (Mute/Solo)
You can use the pads to switch muting on/off
for the audio tracks.
Pad numbers 1–8 correspond to audio track
numbers 1–8.
1.
Press [F3 (Mute/Solo)].
The Muting Audio Tracks with Dynamic
Pads window will open.
In this state, the pads will function as mute
on/off buttons. Each time you press a pad,
muting will be enabled or disabled.
• Pad blinking: muted
• Pad lit:
un-muted
You can "solo" tracks 1–8 by pressing pads
9–16.
You can press [F6 (All Mute)] to mute all
audio tracks. Press [F7 (All Play)] to un-
mute all audio tracks.
Advertisement
Table of Contents
