Using Usb Audio; Setting The Zone Int/Ext Button (Zone Int/Ext Control) - Roland FANTOM-06 Owner's Manual

When the applicable
Button status zone is the current
zone
BASIC
The external sound
module produces sound
when you play the
Lit red
keyboard.
(INT)
ADVANCED
The internal sound engine produces sound when
you play the keyboard.
BASIC
The external sound
module produces sound
when you play the
Lit green
keyboard.
(EXT)
ADVANCED
The external sound module produces sound when
you play the keyboard.
ADVANCED
Lit yellow
(BOTH)
The internal sound engine and the external sound
ADVANCED
module both produce sound when you play the
only
keyboard.
The sound engine is muted. The internal sound
Lit orange engine does not produce sound. If the immediately
(MUTE) previous state was lit green, the external sound
module produces sound.
3 .
As desired, press the [PAN/LEVEL] button, the [CTRL]
button, or the [ASSIGN] button.
4 .
When you operate control knobs [1]–[8] and sliders [1]–
[8], MIDI messages are output according to the buttons
you pressed in step 3.
MEMO
¹ You can make detailed settings in ZONE EDIT (p. 20).
¹ The settings you make can be saved as scene settings "Saving
a Scene" (p. 22).

Using USB Audio

Inputting USB Audio
Use the audio input from a device such as your computer that's
connected to this instrument, and adjust the audio input level to
input USB audio.
1 .
Press the [MENU] button.
2 .
Touch <SYSTEM>.
3 .
Touch <USB> tab.
The USB AUDIO menu screen appears.
4 .
Use the cursor to select "USB Audio Input Switch," and
use the [VALUE] dial to turn the setting "ON."
Audio input from the connected device turns on.
5 .
When the applicable
zone is not the current
zone
Outputting USB Audio
Only if the ZONE INT/
EXT button of another
current zone is on (lit red
Use the audio output from this instrument and adjust the audio
or green), the internal
output level to output USB audio to a computer or other device
sound engine produces
that's connected via USB.
sound when you play the
keyboard.
1 .
2 .
3 .
Only if the ZONE INT/
EXT button of another
current zone is on (lit red
or green), the external
4 .
sound module produces
sound when you play the
keyboard.
5 .
Setting the ZONE INT/EXT Button
(Zone Int/Ext Control)
Here's how to set how the ZONE INT/EXT button works.
1 .
2 .
3 .
ZONE [INT/EXT]
Button
COMMON
Use the cursor to select "USB Audio Input Volume," and
use the [VALUE] dial to adjust the input level.
Press the [MENU] button.
Touch <SYSTEM>.
Touch <USB> tab.
The USB AUDIO menu screen appears.
Use the cursor to select "USB Audio Output Switch," and
use the [VALUE] dial to turn the setting "ON."
Audio output to the connected device turns on.
Use the cursor to select "USB Audio Output Volume,"
and use the [VALUE] dial to adjust the output level.
Press the [MENU] button.
Touch <SYSTEM>.
Select the Zone Int/Ext Control parameter, and edit the
setting.
Parameter Value
BASIC
Zone Int/Ext
Control
ADVANCED
BASIC
Red Green
[SHIFT] +
INT
EXT
ZONE [INT/EXT]
ZONE [INT/EXT]
Button
Unlit
[SHIFT] +
Orange
ZONE INT/EXT buttons
ZONE INT/EXT buttons
Set in the MIXER screen
Control
Explanation
Each ZONE INT/EXT button works
as before.
The following states are now
available for each ZONE INT/EXT
button when you push them: unlit,
red (INT), green (EXT), orange
(MUTE) and yellow (BOTH). For
the yellow (BOTH) state, both the
internal sound engine and the
external sound module play.
ADVANCED
Yellow
BOTH
Red
Green
INT
EXT
Unlit
COMMON
MUTE
33