About The Edit Screen - Roland FANTOM-06 Owner's Manual

Sequencer
5 .
Use the keyboard to specify the instrument that you
want to record (only for a drum kit).
The instrument changes when you press a key of a different
pitch.
For tones other than a drum kit, use the keyboard to specify
the pitch that you want to input.
6 .
Press the tone category buttons [1]–[16] to illuminate
the steps at which you want a note to play.
˜ ˜
HH
SD
BD
Notes are entered at the corresponding step locations in the
screen.
To delete a note, press a lit tone category button [1]–[16] to
make it go dark.
You can also press the [øPLAY] button and enter notes while
the pattern plays.
7 .
Press the lit [TR-REC] button to stop recording.
MEMO
¹ You can't select the TR-REC state during realtime recording or
step recording.
¹ You can hold down the [SHIFT] button and press a tone
category button [1]–[4] to change the measure or beat
location. (Depending on the scale setting, use the [SHIFT]
button + tone category buttons [1]–[8]).
¹ Scroll the keyboard (instrument) area in the left side of the
screen to move the display area up or down.
¹ Use the piano-roll type scroll bar in the upper part of the
screen to move the display area through the measures.
30
˜ ˜

About the Edit Screen

Piano Roll Screen
(Piano Roll Edit)
The piano roll screen shows the pitches of sounds in the music, as
well as their lengths and timings on a keyboard display that's easy
to visually understand.
Ø "Reference Manual" (PDF)
Microscope
Use the microscope to edit single points of performance data
recorded in a pattern.
Ø "Reference Manual" (PDF)